Description Overview of the HPE 1.053GHz PCI-E X16 Intel Xeon The HPE 1.053GHz 30MB L2 Cache Socket PCI-E X16 Intel Xeon PHI 5110P 60-Core Coprocessor Upgrade is a high-performance coprocessor designed for use in servers and high-performance computing systems. It is based on the Intel Xeon PHI architecture and features 60 cores, each running at a clock speed of 1.053GHz. The coprocessor also features a 30MB L2 cache and a PCI-E X16 interface for fast data transfer. This coprocessor is designed to work in conjunction with a host processor to offload specific compute-intensive tasks, thereby increasing the overall performance of the system. It’s suitable for applications that require high-performance computing such as scientific simulations, data analytics, and machine learning. Compatibility and system requirements The HPE 1.053GHz 30MB L2 Cache Socket PCI-E X16 Intel Xeon PHI 5110P 60-Core Coprocessor Upgrade is designed to be compatible with a wide range of server and high-performance computing systems. It has a PCI-E X16 interface, which is a standard interface found in most modern servers and workstations. The coprocessor also requires a host processor that supports Intel’s Many Integrated Core (MIC) architecture. In terms of system requirements, the coprocessor requires a power supply of at least 350W and a cooling solution that can handle the thermal output of the coprocessor. The coprocessor also requires a specific version of the BIOS and the operating system to be compatible with the coprocessor. It’s important to check the technical specification of the server or workstation to ensure that it meets the requirements and is compatible with this coprocessor. Additionally, It’s also recommended to check with the manufacturer or vendor to ensure that the coprocessor is compatible with the system. Installation and set up guide Installing the HPE 1.053GHz 30MB L2 Cache Socket PCI-E X16 Intel Xeon PHI 5110P 60-Core Coprocessor Upgrade is a straightforward process, but it is important to follow the proper steps to ensure a successful installation. Here is a general guide for installing the coprocessor: Power off the server and unplug all cables before installing the coprocessor. Carefully remove the cover of the server to access the PCI-E slot where the coprocessor will be installed. Carefully align the coprocessor with the PCI-E slot and gently insert it into the slot. Make sure that the coprocessor is fully seated in the slot and properly connected. Replace the cover of the server and reconnect all cables. Power on the server and enter the BIOS settings. Make sure that the coprocessor is detected and enabled in the BIOS settings. Install the necessary drivers and software for the coprocessor. These can be obtained from the manufacturer’s website. Once the drivers and software are installed, reboot the server and verify that the coprocessor is functioning properly. It’s important to follow the instructions provided by the manufacturer or vendor when installing the coprocessor. Additionally, some vendors might have additional instructions for the installation, it’s recommended to follow them. General Information about this HP 708360-001 Part Number Or SKU# C1P87A Brand Name: HPE Product Type: Coprocessor Upgrade Technical Information for HP Coprocessor Upgrade Manufacturer: IntelProcessor Core: Hexaconta-core (60 Core) Clock Speed: 1.05 GHz Process Technology: 22 nm Processor Socket: PCI Express x16
